We’ve updated our Alfa Romeo Brera S image gallery with a new set of pictures that are more artistic than the first ones we published about a week ago when Alfa took the wraps off its Prodrive-prepped coupe. The Brera S, which will be available solely in the 
Source URL: https://sparesomeribs.blogspot.com/search/label/Alfa%20Brera
In collaboration with Prodrive, Alfa Romeo has developed a special edition version of its Brera coupe model dubbed “Brera S” that will be sold exclusively in the While the car retains the same power as the standard Brera, Prodrive has made changes to the suspension and the interior and exterior styling along with the addition of a new exhaust system. However, Prodrive’s main goal was to seriously upgrade the Brera’s handling and to do that, the UK firm developed new springs and dampers which were tuned to to achieve the desired ride/handling balance and steering response required by driving enthusiasts in the UK. -Continued
At the same time, the suspension static geometry was also revised to optimize steering and handling while the car’s height was lowered height (-10mm). Prodrive also fitted the Brera S with new lightweight 19” alloy wheels and Pirelli PZero Nero tires along hollow anti-roll bars and aluminium suspension components from the Factory.
As a result, the weight of both Alfa Brera S models is lower than the standard cars. In particular, the front-wheel drive 3.2 V6 JTS is almost 100 kg lighter than the Q4 version and the 2.2 JTS version weighs 35 kg less. However, according to Prodrive’s data sheet, performance is unchanged with the 2.2 JTS and 3.2 V6 JTS Alfa Brera S can go from 0 to 100 km/h in 8.6 and 7.0 seconds respectively and on to a top speed of 139 and 155 mph.
While changes on the outside are limited to the new alloys and exhaust pipes, inside the V6 version cabin is dressed in black leather with red stitching while the centre console and instruments are faced in a dark finish. This interior can also be specified on the 2.2 JTS. Both versions get foot pedals from drilled aluminum and the headrest recess houses a limited edition Brera S aluminum plate, featuring the flags of
BRERA TECHNICAL DATA
| ENGINE | 2.2 JTS | 3.2 JTS V6 |
| No. of cylinders, arrangement | 4 in line | 60 degree V6 |
| Bore x stroke (mm) | 86 x 94.6 | 89 x 85.6 |
| Displacement (cc) | 2198 | 3195 |
| Compression ratio | 11.3:1 | 11.25:1 |
| Max. power output: bhp (kW-EC) at rpm | 185 (136) 6500 | 260 (191) 6300 |
| Peak torque: Nm (kgm-EC) at rpm | 230 (23.4) 4500 | 322 (32.8) 4500 |
| Timing system (control) | DOHC (chain), 4 valves per cylinder, double electrohydraulic continuous phase variator | 4 OHCs (chain), 4 electrohydraulic continuous phase variators |
| Fuel feed | MED 7.6.1 electronic direct injection integrated with ignition system | MED 7.6.2 electronic direct injection integrated with ignition system |
| ELECTRICAL SYSTEM (12V) | | |
| | 90/120 | 90/150 |
| TRANSMISSION | | |
| Drive | Front | Front |
| Number of gears | 6 + 1R | 6 + 1R |
| Final ratio | 4.176:1 | 3.895:1 |
| TYRES | | |
| Standard version | 235/40 R19 | 235/40 R19 |
| STEERING | | |
| Steering system | Rack and pinion with power steering | Rack and pinion with power steering |
| Turning circle (m) | 10.7 | 10.7 |
| SUSPENSION | | |
| Front | Independent with double wishbones and anti-roll bar located via ball joints | Independent with double wishbones and anti-roll bar located via ball joints |
| Rear | Independent with Multilink architecture | Independent with Multilink architecture |
| BRAKES – (DISCS) | 2.2 JTS | 3.2 JTS V6 |
| Front (mm) | Ventilated 330 x 28 D, fixed aluminium calliper with four 42 mm pistons | Ventilated 330 x 28 D, fixed aluminium calliper with four 42 mm pistons |
| Rear (mm) | Solid 278 x 12 D, combined 38 mm floating calliper | Ventilated 292 x 22 D, combined 42 mm floating calliper |
| WEIGHTS – TANK CAPACITY | | |
| Fuel tank capacity (litres) | 70 | 70 |
| Kerb weight DIN (kg) | 1445 | 1540 |
| Max towable weight (kg) | 1450 | 1500 |
| PERFORMANCE | | |
| Top speed mph (km/h) | 139 (224) | 155 (250) |
| Acceleration (driver + 30 kg): 0 to 62 mph (s) | 8.6 | 7.0 |
| FUEL CONSUMPTION – EMISSIONS* | | |
| Urban cycle mpg (l/100km) | 22.2 (12.7) | 17.2 (16.4) |
| Extra urban cycle mpg (l/100km) | 39.2 (7.2) | 35.8 (7.9) |
| Combined cycle mpg (l/100km) | 30.7 (9.2) | 25.7 (11.0) |
| Exhaust emissions – CO2 (g/km) | 218 | 260 |
| Emissions Standard | EU IV | EU IV |
EQUIPMENT
ALFA BRERA S 2.2 JTS and 3.2 JTS
EXCLUSIVE CONTENT 2.2 JTS and 3.2 JTS
Alfa Romeo specialist Autodelta is broadening its line up with the presentation of the Brera J5 3.2 C models equipped with the Q-Tronic 6-speed semi-automatic transmission. Other than that, the Autodelta Brera J5 3.2 C Q-Tronic comes with the same features as the Model Year 2008 (MY) upgrade that was officially launched at Autosport International (The Brera 3.5 3.2 C Q-Tronic thus delivers the increased maximum power of 352 Hp and a peak torque of 435 Nm. Performance is similar to the Brera MY with 0-100 km/h reached in 5.3 seconds while its top speed is a little over 260 km/h (162 mph). -Continued
Autodelta boss, Jano Djelalian says: “We’re delighted to be able to widen the Brera J5 3.2 C model range to encompass the Q-Tronic transmission. Alfa Romeo’s sequential transmission systems have always been very popular with our customers, especially Selespeed, and we have had a lot of demand put on us recently to make our supercharging conversion available to Q-Tronic version.”
Via: Autoblog.nl
The rumours we were hearing about the British-honed Alfa Romeo Brera S turned out to be true as the Italian carmaker made it official today that it has teamed up with Prodrive to develop a bespoke version of the Brera coupe. According to Prodrive Project Leader, Peter Cambridge, the collaboration has “built on the existing model’s capabilities to deliver outstanding driver feedback and handling.” Unfortunately for most of our Euro friends, production of the Alfa Brera S will be limited to 500 numbered cars specifically for the British market. -Continued
The Brera S will feature revised suspension settings along with further enhancements to the exterior and interior of the car which will be available with two existing petrol engines in standard specifications. Prices and specifications will be revealed at launch on 19 May 2008.
There’s no official announcement, but the boyz at Brit car magazine “EVO” are reporting that Via: Autoblog.it , Source: EVO
Autodelta introduced the Brera J5 3.2 Compressore ‘Model Year 2008’ (MY) which has been developed specifically for hot and tropical climate requirements featuring a new air-to-air intercooler mounted behind the front bumper and new engine mapping. The 3.2 V6 engine’s power curve has been revised to allow stronger performance at peak revs, which are now raised to 6,400rpm and peak power is 352 HP (up by 4 HP over the J5, and 92 HP over the standard model) and improved torque which now is 435 Nm (up by 5 Nm). According to the
The programm for the revised engine was overseen by Autodelta’s head of R&D, Sergio Truzzi; while testing was carried out in
“
